Configuring CLS scanners

** NOTE ** currently we have no uniform password scheme for logging into these scanners remotely. Try _RedZebra15, if that doesnt work, contact GITIG. 

GACLS printers are on the same domain as us, so they can be accessed remotely by typing their IP address into the address bar of your preferred web browser. 

There is a log in box at the top of the page once there, see the note above for access. 

-once logged in select the "Scan" tab at the top of the page just below the logout button
-select "Scan to FTP/SFTP/Network/SharePoint"
-select the appropriate profile, then set it to the network radial 
-click submit at the bottom of the page after selecting the network radial 
-click "scan to FTP/SFTP/Network/SharePoint profile." this is where we will edit the profile info. 
-edit profile name first, we want it to be the name of the site, scanner number. for example, Duluth, Scanner 1
-edit the network folder path to show \\prdgaclscussa.dc.onepsi.net\galcscanner\(site)\(scanner #) **Fill in the correct site name and scanner number here removing the ()**
-make sure file type is set to JPEG
-Set DPI to 300
-go down to authentication setting section of the page 
-set Auth. method from auto to kerberos
-set user name to: svc_gacls_scanner@dc.onepsi.net
-set password to: GY1H2-1c-65y
-set Kerberos server address to: 10.20.160.80
-Click Submit
-select the "date and time" hyper link at the very bottom of the page
-check the radial next to "synchronize with the SNTP server"
-click the "SNTP" hyperlink 
(include SNTP Date and time screen shot here)
-go back to the profile 1 page and click submit, a test will run and should pass.

GALCScanner\Duluth\Scanner(1-3)
GALCScanner\Macon\Scanner(1-2)
GALCScanner\Marietta\Scanner(1-2)
GALCScanner\Savannah\Scanner(1-2)